White Rhino - Dual Container with Quartz Glass Straw and Chillum

Step 1: Gather Your Bong Cleaner and Start Prep

First and foremost, you’ll need to make sure you have what you need for a thorough cleaning. We recommend using 91-99% isopropyl alcohol for the best results. You’ll also want to grab a plastic bag, your bong, and a pair of gloves, if you’d like. 

Step 2: Do a Water Rinse

Start out by doing a simple rinse of your bong with some warm water. Add some to the inside of your bong and give it a few gentle shakes to distribute the water around. 

Empty the water out before you move on, then set your bong inside of the plastic bag you grabbed earlier.

Step 3: Add Some Salt and Alcohol

Place your bagged bong in the sink, then pour in your isopropyl alcohol to a point that’s about half of the usual amount of water you’d add in to smoke.

Next, add some coarse salt through the mouthpiece (the part you place your lips on to inhale) and into the bong. 

Step 4: Get Shakin’

Carefully shake the salt and alcohol mixture in your bong to ensure it gets into all the nooks and crannies.

Step 5: Let it Soak

After you’ve done some shaking, allow your bong to sit and soak for around 30 minutes or so.

Step 6: Empty, Rinse, and Repeat

Step 7: Dispose of Your Bong Bag

​

Read full blog here. 

Dabbing is legal if you are using legal cannabinoids to dab. Under the 2018 Farm Bill, Delta 8, Delta 10, and other hemp-derived cannabinoids are legal if they contain less than 0.3% Delta 9 THC by dry weight.

Dabs, also known as a "wax dabs", are a concentrated form of cannabis. These concentrated forms come in different textures like waxes and budders. Regardless of texture, dabs are typically used by being heated and then inhaled through special equipment, such as a dab rig or pen. The concept is like vaping or smoking - you are inhaling the vapors created by heating the dab. Inhaling is the most effective and quickest way to get the effects of your choice cannabinoid.

1.Add water to your dab rig’s chamber.

Test the waterline by inhaling with no banger in the downstem. If water backsplashes into your mouth, you have too much water in the rig. You need to pour some out.

Use your torch to heat the banger until it gets red because it’s so hot. You want to apply the torch to the outside and bottom because that’s where you’ll load the concentrate.

2.Wait 30-45 seconds for it to cool down once the banger is hot.

If it is too hot, it will scorch your concentrate, and that’s not how you do dabs.

3.Apply the wax onto the banger with your dabber, then slowly inhale it through the mouthpiece.

Rotate the dabber tip on the hot banger to avoid wasting any wax stuck on it. Use a long, slow inhale because most of the concentrate doesn’t vaporize instantly.

4.Cover the dab with a carb cap and finish inhaling.

The cap helps regulate the airflow and gives you a better hit. This is how to hit a dab rig. 

5.Exhale the vapor and repeat the process.

Remember to be cautious when you first begin dabbing. You don’t want to over-consume the concentrate and green out. It’s easy to do when dabs are so potent.

Read about the different types of wax dabs here.

Check out our blog on how to clean your glass here.